Starlink Mini Car Mount
- Free tracked US shipping
- 60-day money back
- Lifetime housing warranty
- No drilling, no adhesive
What is in the box
Injection-molded ABS housing, magnetic base with rubber-coated magnet faces, four adhesive mounting plates for aluminum, fiberglass and glass roofs, cable pass-through grommet, install card.
Shipping and returns
Orders leave the facility within 2 business days, tracked to all 50 states. Send it back within 60 days for a full refund, no restocking fee.
Fit
Built around the Starlink Mini dish only. Works on any reasonably flat panel with a clear view of the sky: roof, rack, hood, tailgate.
Access internet,anywhere.
The mount
A closed ABS shell on a magnetic base. The dish drops in, the lid closes, the whole thing lands on the panel in one motion and comes off the same way. No brackets to bolt on, no holes in the roof, no metal over the antenna.
- Holds at highway speed
- Steel, aluminum, fiberglass, glass
- Two minutes, no tools
Does it fit my vehicle?
The brand of the vehicle does not matter. The roof material does, and every material is covered by a plate already in the box.
Rubber-coated magnets hold straight on the panel. Set it once and drive.
An adhesive plate turns a non-magnetic roof into a magnetic one. No drilling, no roof penetration.
Plate on the glass, housing on the plate. Nothing is left behind when the rental goes back.
Anything reasonably flat with a clear view of the sky works. Nothing about the kit is vehicle specific.
Built forthe elements
Rated −40 °F to 122 °F. UV-stabilized pigment so it does not chalk out after a summer on the roof. Sealed against rain, road salt and dust.
From basecamp
to off-grid
Leave the dish in the housing between trips. Pull into camp and it is already aimed at the sky — no unpacking the tripod, no finding a level rock, no cable run across the dirt. Drive off and nothing needs to be stowed.
“Ran the Baja border with it on the roof. Crosswinds, washboard, one hailstorm. It never moved and I never lost a call.”
“I needed it on a car I care about. Rubber feet, no marks on the paint after four months, and it comes off in a second when I go into a garage.”
“Sits on the hood at camp, goes back in the trunk when we leave. Wind off the ocean all night and the dish did not budge.”
“Put it next to my solar panel on the tonneau cover. Two summers of sun and it still looks new — no chalking, no warping.”
“Branches, dust, a lot of washboard. The shell took all of it and the Mini underneath is spotless. That is what I paid for.”
“Mounted it on top of the roof box with the plate. Highway every weekend, zero issues, and signal is the same as with the dish bare.”
Stick. Click. Drive.
Two minutes the first time, two seconds after that. Every mounting plate is in the box.
Clean the spot and press the plate on. Steel roofs skip this step entirely.
Set the housing on the plate. The magnets pull it into place.
Go. Lift it off anytime: tree cover, car wash, parking garage.
Specifications
- Material
- Injection-molded ABS
- Weight
- 900 g
- Dimensions
- 350 × 310 × 50 mm
- Mounting
- 4 rubber-coated magnets, 88 lb (40 kg) pull each
- Surfaces
- Steel, aluminum, fiberglass, glass
- Temperature
- −40 °F to 122 °F
- Signal
- No metal over the dish
- Tested to
- 130 mph
- Power draw
- None — passive housing
Questions we get a lot
Does this include the Starlink Mini?
No. SETBOX is the housing and mounting system. It is built to fit the Starlink Mini you already own.
Does the housing block the Starlink signal?
No. ABS is transparent to the signal, which is exactly why there is no metal over the dish. No effect on speed, no effect on latency.
Wait, plastic? Is what durable enough?
Yes. Injection-molded ABS is what carmakers use for exterior trim, mirror housings and grille surrounds: parts expected to live outside a vehicle for a decade. This is not a 3D print and not a budget material.
How does it handle heat and cold?
The housing is rated from −40 °F to 122 °F, and the ABS is pigmented with a UV stabilizer, so it holds its color instead of chalking out after a summer on the roof.
Does color matter if my rig lives in the sun?
White, Grey, Olive and Black are available. If you are running desert heat or parking out in the open all summer, pick White: light colors reflect heat instead of absorbing it, which keeps the dish cooler. For normal use any color works.
How much power does the mount draw?
None. It is a passive housing. The Starlink Mini itself draws roughly 20 to 40 W depending on load.
It lifts off in seconds. Will someone steal it?
A stolen Starlink is worth nothing to whoever takes it. The dish is registered to your account in the app, and without that account it cannot be activated.
What surfaces can I mount it on?
Steel, aluminum, fiberglass and glass. One kit covers all four.
Do I need to buy anything extra for a non-magnetic roof?
No. The metal plates for aluminum, fiberglass and glass are included in the box.
Do I need to drill into my vehicle?
No. The neodymium magnets hold the housing on their own. No holes, no adhesive on your paint, no permanent modification, and the whole kit lifts off leaving the panel as it was.
How long does install take?
About two minutes. Set the housing where you want it and let the magnets do the work.
Can I drive with it mounted?
Yes, at highway speeds. Owners have run it thousands of highway miles and through rough offroad trails without it shifting.
Will the magnets scratch my paint?
No. Every magnet face is rubber coated, so nothing metal ever touches the panel.
Where on the vehicle should it go?
Roof, roof rack, hood, tailgate, anything reasonably flat with a clear view of the sky. Nothing about the kit is vehicle specific.
Where do you ship?
All 50 US states, including Alaska and Hawaii, tracked end to end. We do not ship outside the United States at this time.
When does my order ship?
Orders leave our facility within 2 business days. You get a tracking number by email the moment the parcel is handed to the carrier.
What if I do not like it?
Send it back within 60 days for a full refund, no restocking fee.
What is the warranty?
Lifetime on the injection-molded ABS housing: if it cracks or fails in normal use, we replace it free and cover ground shipping in the US. The magnetic hinges, the rubber coating on the magnet faces and the adhesive metal plates are covered for one year from delivery.
Do you offer bulk or dealer pricing?
Not right now. If you are outfitting a fleet, email support@getsetbox.com and we will let you know when that changes.
Where is SETBOX made?
Designed and manufactured by Setbox in Ukraine.
How do I reach a human?
Email support@getsetbox.com and a person answers.
No questions here yet, check another tab.
Still unsure — email us, we answer with real numbers.
What a complete mobile setup needs
Four parts: the dish, something that holds it to the vehicle, power that does not depend on a wall socket, and a way to get the cable inside.
Your own Starlink Mini. Not included, and we will not resell you one.
This kit. Housing, magnetic base, and a plate for every roof material.
The optional 12V adapter runs the Mini off the socket — no inverter, no splicing.
Grommeted pass-through. Most owners run it through a door seal until the build goes permanent.
Build your complete Starlink Mini setup
Housing, magnetic base and every mounting plate in one box. Free tracked US shipping, 60 days to send it back.
Get the kit